General

Can I extend the range on my HUB?
You can use a power line extender to allow the HUB to be moved closer to the meter if your router is too far away from the meter. What is power line ada...
CE Documentation
Below is the documentation for European Conformity (Solo 3 Meter) emlite CE Declaration of Conformity [PDF] emlite EC-type Certificate [PDF] GEO CE...
During the HUB upgrade what do the LED's indicate?
Previously: LEDs flashed green alternately only during the period of the initial HUB firmware upgrade. All other upgrades (eg. display firmware) were done...
External Antenna for the Solo III meter
When the Solo III meter is installed in a position that has too much attenuation (eg. too far or too many walls) or installed in an RF-screened enclosure...
How do I associate energynote without a display/secure code?
Providing the cloud light is showing amber on your Hub press and hold cloud button for 3-4 seconds until the light flashes, select the time zone on your e...
How do i change the currency on my display to Euro?
1. Press and hold the middle button on the display until the general settings screen appears 2. You will then have the option to select INFO, SETTINGS o...
How do I reset the hub?
To reset the hub, insert a pointed object in to the reset button on the base of the hub for five seconds while the hub is powered on. The hub will then ...
How do I reset the Solo III?
Remove power to the display and then press and hold the three buttons while powering the display back on. Press the right (n) for DATA RESET and then th...
My energynote account does not match my Solo III display
If you install your Solo III display and then register on energynote at a later date then energynote will fail to match your display reading until after 3...
My meter looks different to the one on the manual
There are 3 different variants,  Please refer to the label on your meter to identify which variant you have,  ASL/EM-LITE 868 only (PCK-S3-005) ...