The target consumption is best set by working out your daily average from your most recent electricity bill. You could also use this rough guide to what ...

You can find tariff information on your electricity bill. If not, you will need to contact you energy supplier.

The Ensemble system is a good indicator of your approximate electricity consumption, but it is only intended as a guide. The Sensor does not communicate w...

The Display uses less than 0.35 watt hours (or approximately €0.07) a month to run (tariff dependent) – that’s less than making a single slice of toast! ...

There are two options for resetting the Display. You can either erase the memory or reset the network. For either option, first unplug the Display’s powe...

This symbol will flash if: You do not have a Bridge connected to your system. If you do have a Bridge:  The outer rings will flash if the Di...

The batteries provided should last for at least one year. Toward the end of their life the battery symbol will flash to let you know to replace them. Make...

The communication symbol will flash if: The Display and Transmitter are unable to communicate. The Display is receiving dat...

There are three reasons why the units will have problems communicating: Range – Try moving the Display to a closer location to the Tr...

The Ensemble is designed to operate in a home environment over a range of 30 meters with two walls in between the Transmitter and Display unit. The 868MH...